Additive
| CamBam.Values.CBValue`1[[System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
BackFace
| CamBam.Values.CBValue`1[[System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
BackFaceCulling
| CamBam.Values.CBValue`1[[System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
BackFaceZeroZ
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
BoundaryMargin
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
BoundaryMethod
| CamBam.Values.CBValue`1[[CamBam.CAM.BoundaryMethods, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
BoundaryShapeIds
| System.Int32[]
List of drawing objects to use as toolpath boundary |
BoundaryTaper
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
CADFile
readonly | CADFile
|
ClearancePlane
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
ClipAreaMax
| CamBam.Values.CBValue`1[[CamBam.Geom.Point2F, CamBam.Geom, Version=0.9.4466.39126, Culture=neutral, PublicKeyToken=null]]
|
ClipAreaMin
| CamBam.Values.CBValue`1[[CamBam.Geom.Point2F, CamBam.Geom, Version=0.9.4466.39126, Culture=neutral, PublicKeyToken=null]]
|
CurrentTool
readonly | CamBam.Library.ToolDefinition
|
CustomMOPFooter
| CamBam.Values.CBValue`1[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
CustomMOPHeader
| CamBam.Values.CBValue`1[[System.String, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
CutFeedrate
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
CutOrdering
| CamBam.Values.CBValue`1[[CamBam.CAM.CutOrderingOption, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
DepthIncrement
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
Enabled
| System.Boolean
If Enabled is true, then display the toolpaths associated with this machine op and include in gcode output. |
FlipAxis
| CamBam.Values.CBValue`1[[CamBam.CAM.FlipAxisOption, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
GeomExtremaMax
readonly | Point3F
|
GeomExtremaMin
readonly | Point3F
|
IsScanline
readonly | System.Boolean
|
IsWaterline
readonly | System.Boolean
|
LeadInMove
| CamBam.Values.CBValue`1[[CamBam.CAM.LeadMoveInfo, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
LeadOutMove
| CamBam.Values.CBValue`1[[CamBam.CAM.LeadMoveInfo, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
MaxCrossoverDistance
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
MillingDirection
| CamBam.Values.CBValue`1[[CamBam.CAM.MillingDirectionOptions, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
Mold
| CamBam.Values.CBValue`1[[System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
MOPTypeName
readonly | System.String
|
Name
| System.String
Each machine operation can be given a meaningful name or description.
This is output in the gcode as a comment and is very useful for keeping track of the function
of each machining operation. |
NeedsRebuild
readonly | System.Boolean
|
OptimisationMode
| CamBam.Values.CBValue`1[[CamBam.CAM.OptimisationModes, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
Part
| CamBam.CAM.CAMPart
The parent part that contains this mop. |
PlaneSliceOnly
| CamBam.Values.CBValue`1[[System.Boolean, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
PlungeFeedrate
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
PrimitiveIds
| System.Int32[]
List of drawing objects from which this machine operation is defined. |
Profile3DMethod
| CamBam.Values.CBValue`1[[CamBam.CAM.Profile3DMethods, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
RegionFillStyle
| CamBam.Values.CBValue`1[[CamBam.CAD.RegionFillStyles, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
Resolution
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
RoughingClearance
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
RoughingFinishing
| CamBam.Values.CBValue`1[[CamBam.CAM.RoughingFinishingOptions, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
SpindleDirection
| CamBam.Values.CBValue`1[[CamBam.CAM.SpindleDirectionOptions, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
SpindleRange
| CamBam.Values.CBValue`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
SpindleSpeed
| CamBam.Values.CBValue`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
StartCorner
| CamBam.Values.CBValue`1[[CamBam.CAM.Corner, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
StartPoint
| CamBam.Values.CBValue`1[[CamBam.Geom.Point3F, CamBam.Geom, Version=0.9.4466.39126, Culture=neutral, PublicKeyToken=null]]
|
StepOver
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
StepoverFeedrate
| CamBam.Values.CBValue`1[[CamBam.CAM.StepoverFeedrateInfo, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
StockSurface
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
Style
| System.String
|
Tag
| System.String
|
TargetDepth
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
ToolDiameter
| CamBam.Values.CBValue`1[[System.Double, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
ToolNumber
| CamBam.Values.CBValue`1[[System.Int32, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]
|
ToolpathGenerating
readonly | System.Boolean
|
Toolpaths2
| CamBam.CAM.ToolpathSequence
|
ToolProfile
| CamBam.Values.CBValue`1[[CamBam.CAM.ToolProfiles, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
Transform
| CamBam.Values.CBValue`1[[CamBam.Geom.Matrix4x4F, CamBam.Geom, Version=0.9.4466.39126, Culture=neutral, PublicKeyToken=null]]
|
VelocityMode
| CamBam.Values.CBValue`1[[CamBam.CAM.VelocityModes, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
WorkPlane
| CamBam.Values.CBValue`1[[CamBam.CAM.WorkplaneOptions, CamBam.CAD, Version=0.9.4466.39127, Culture=neutral, PublicKeyToken=null]]
|
Clone
| MachineOp Clone () |
EvaluateAutoCBValue
| Boolean EvaluateAutoCBValue (ICBValue toset, String name) |
Paint
| Void Paint (ICADView iv, Display3D d3d, Color arccolor, Color linecolor, Boolean selected) |
PostProcess
| Void PostProcess (MachineOpToGCode gcg) |
PreProcess
| Boolean PreProcess (MachineOpToGCode gcg) |
ShouldSerializeAdditive
| Boolean ShouldSerializeAdditive () |
ShouldSerializeBackFace
| Boolean ShouldSerializeBackFace () |
ShouldSerializeBackFaceCulling
| Boolean ShouldSerializeBackFaceCulling () |
ShouldSerializeBackFaceZeroZ
| Boolean ShouldSerializeBackFaceZeroZ () |
ShouldSerializeBoundaryMargin
| Boolean ShouldSerializeBoundaryMargin () |
ShouldSerializeBoundaryMethod
| Boolean ShouldSerializeBoundaryMethod () |
ShouldSerializeBoundaryTaper
| Boolean ShouldSerializeBoundaryTaper () |
ShouldSerializeClipAreaMax
| Boolean ShouldSerializeClipAreaMax () |
ShouldSerializeClipAreaMin
| Boolean ShouldSerializeClipAreaMin () |
ShouldSerializeCutOrdering
| Boolean ShouldSerializeCutOrdering () |
ShouldSerializeDepthIncrement
| Boolean ShouldSerializeDepthIncrement () |
ShouldSerializeFlipAxis
| Boolean ShouldSerializeFlipAxis () |
ShouldSerializeLeadInMove
| Boolean ShouldSerializeLeadInMove () |
ShouldSerializeLeadOutMove
| Boolean ShouldSerializeLeadOutMove () |
ShouldSerializeMillingDirection
| Boolean ShouldSerializeMillingDirection () |
ShouldSerializeMold
| Boolean ShouldSerializeMold () |
ShouldSerializePlaneSliceOnly
| Boolean ShouldSerializePlaneSliceOnly () |
ShouldSerializeProfile3DMethod
| Boolean ShouldSerializeProfile3DMethod () |
ShouldSerializeRegionFillStyle
| Boolean ShouldSerializeRegionFillStyle () |
ShouldSerializeResolution
| Boolean ShouldSerializeResolution () |
ShouldSerializeStartCorner
| Boolean ShouldSerializeStartCorner () |
ShouldSerializeStepOver
| Boolean ShouldSerializeStepOver () |
ShouldSerializeStepoverFeedrate
| Boolean ShouldSerializeStepoverFeedrate () |
ShouldSerializeTargetDepth
| Boolean ShouldSerializeTargetDepth () |